The Screw-less Wall Mount Kit works exactly as advertised. It’s one solid piece of 3D printed, off-white plastic, shaped like an L-bracket with a circular cutout for the base of the Wyze Pan Cam (sold separately) and a channel/hole for the cord. The adhesive is beyond adequate and adheres quite strongly, though it is not reusable. After determining the appropriate height for the Pan Cam, and again, keeping in mind the adhesive was a one-and-done deal, I used a level to hang the Mount straight. Based on adhesion I chose to put the Cam right on the mount, however the recommendation is to wait 24 hrs. I’m very pleased with the result (as pictured) and highly recommend this affordable mounting option. Installation took under five minutes and for me that included setting the Pan Cam on the mount. The cam sits perfectly in the groove and stays securely in place even when it pans rapidly.There are a few things I feel inclined to address related to some of the negative reviews on this product. The first is about the reviews complaining that the Wyze Pan Cam wasn’t included with the Mount or people not realizing it wasn’t included until they received it. I’m not sure why any rational adult consumer would assume that an item with a price point of under $20 would include an additional, almost $60 Pan Cam from another manufacturer. That makes no sense. None. But to than turn around and leave a terrible review because of an error in your own judgement and because of your own disappointment is weird and mean spirited. Take responsibility. Not one place on the product page does it even vaguely allude to the idea that a Wyze Pan Cam is included.The second issue is the reviews complaining about the Mount ripping a “giant hole” or tearing the paint etc from the walls when removed. Aside from it being obvious that an industrial strength adhesive is used — not command strip technology — I’m not sure why proper preparation with a solvent or hairdryer to warm and loosen the adhesive wasn’t utilized. Anyone beyond 7 yrs old with common sense knows that even scotch tape will tear a wall if removed hastily or improperly. This isn’t to say slight/minimal damage won’t happen, but the giant tears and 3-4 layer deep holes are just too ridiculous to believe. Patience and preparation when removing will go a long way.I’d like to address the reviews on this product that have nothing to do with the product at all and are about the Wyze Pan Cam itself. Is it that hard to leave a review, positive or negative, on the correct page? If you can’t manage that, then your credibility as a reviewer is zilch.Lastly, there seems to be some misconception about 3D printing as being cheap or of sub par quality. Google “3D printing” and “strength” and educate yourself. It’ll be worth your time. It is true that defects or flaws happen, but that’s true in ANY area of manufacturing. If that’s the case, return or exchange the item. It’s really that easy and not a huge deal. The notion that the company has somehow “misled” or “misrepresented” itself because the Mount is 3D printed is ridiculous and you’d be missing out on a well-designed, strong wall mount for your Pan Cam if you let the negative reviews make you believe that to be the case.