Additional Details
Small Business
Shop products from small business brands sold in Amazon’s store. Discover more about the small businesses partnering with Amazon and Amazon’s commitment to empowering them.
Small Business
This product is from a small business brand. Support small.
Add a debit or credit card to save time when you check out
Convenient and secure with 2 clicks. Add your card
Customers also viewed these products
Page 1 of 1 Start overPage 1 of 1
Product Description
You'll get exactly what's pictured above when you buy this awesome bundle...
Zippo Flint Replacement Instructions
1. Remove the inside unit from the case.
2. Turn over and unscrew the flint spring using a small screwdriver or a coin. Slowly remove the spring.
3. Turning the inside unit right side up again, remove the remaining piece of flint, if any, by gently tapping the inside unit on a hard surface. Remove any stubborn flint slivers or residue with an unfolded paperclip.
4. Insert a new flint in the brass-colored flint tube. Be sure not to confuse the brass tip on the end of the flint spring. Even though it looks like a flint, it is not a flint.
5. Replace the flint spring and turn clockwise until tight. Important Tip: Be sure the screw is tightened so the lid can fully close. A tight seal will help delay the lighter fluid’s evaporation. Retighten if the lid does not close.
6. If the flint wheel binds after a new flint is installed, turn the wheel backwards a few times.
7. Tip: You can keep extra flints under the felt pad for future use.
Zippo Wick Replacement Instructions
1. Insert a new wick either downward through the chimney or up through the bottom of the fuel chamber.
2. Remove all of the fuel chamber’s components; the flint screw, felt pad, packing material, and the old wick.
3. Install the new wick thru the chimney hole and bend the top portion of the wick over the chimney to hold it in place during reassembly. – On a pipe lighter, the chimney cap is removable. Just slip your thumbnail under the edge at either end and lift.
4. Replace the packing material in small pieces, interweaving the wick between the padding in a serpentine or “S” pattern. The goal is to make sure the wick has as much contact with the packing material as possible.
5. Reinstall the felt pad over the flint tube and secure it with the flint spring as previously mentioned – be sure the flint didn’t fall out during this process.
6. Trim the wick even with the chimney height and reinstall the insert into the case.
A little more about us...
|
|
|
|
|---|---|---|
|
About Zippo |
About Koala Lifestyle Koala Lifestyle is a family owned business. We believe in making a positive impact on our customers' lives and our country's future. For both of these reasons, we strive to create and sell top of the line American Made products. It's kinda our moral imperative... |
Bonus Info about our Koala Pouch Our 100% American Made Koala Pouch is made with 100% Virgin American Cotton. 2.75 x 4 Inch size is perfect for storing your Zippo Products. Its double drawstring construction seals tights so you never have to worry about losing what you're carrying. |
