This is a good price for a 200 inch screen at less than $100. Screen is canvas but very white. The wrinkles weren’t a problem for me after I stretched it out over the frame. The grommets are good quality for attaching the screen to a frame. One negative is the loss of brightness due to the amount of light that penetrates the fabric. My projector is powerful enough to overcome this but may require a more powerful projector than other screens.
It seems that pvc frames are most popular but I used ¾” emt conduit. It’s plenty strong, light weight, and easy to use. Get 7 10’ lengths plus fittings. I ordered fittings from makerpipe.com.
The drawing shows the dimensions and fittings I used. The 3 vertical poles are used full length. Cut the 4 remaining pieces to equal lengths to make the upper and lower cross pieces about 185”. I had to cut each piece again to get to the proper length. The final length was 88 ¾” each but this will depend on the dimensions of the fittings you use. Use a conduit cutter for smooth and easy cuts.
When attaching the lower cross piece to the poles, use fittings that allow the pole to pass through without cutting so the cross piece can be raised or lowered to match the screen attachment method you use. To make attaching the screen quick and easy I attached a Velcro strip to each screen grommet. Cut a short slit in one end of the strip with scissors, and thread the strip through the grommet and then through the slit. No more threading bungee cords through grommets each time.
Attach one of the left-over pieces of emt to the end of each pole using a “T”. Stand the frame up and rotate the feet out to support it. Be sure to attach strings to the top of each end of the fame for additional support. It doesn’t take much of a breeze to blow it over.
I noticed that the center pole was visible during use due to the amount of light it reflected so I sprayed it with flat black paint, which fixed the problem.
I'm very happy with the combination screen and frame. I leave the frame assembled and leaning against our camper so set-up is a breeze. I figure if it takes more than 30 minutes to set it up we wouldn't use it as much as we do.
Enjoy fast, free delivery, exclusive deals, and award-winning movies & TV shows with Prime
Try Prime
and start saving today with fast, free delivery
Frequently bought together
$96.00
Get it as soon as Sunday, May 12
In Stock
Total price:
To see our price, add these items to your cart.
Choose items to buy together.
Similar items that may deliver to you quickly
Page 1 of 1 Start overPage 1 of 1
Product Description
Canvas material with 1.6 gain. the gain is higher the picture quality is better.
16:9 screen format and diagonal 200'' offers 176'' x 101-1/5'' viewing area, packaged in folded professionally, the package size is 15 x 9 x 4 inch portable for outdoor. the 200-300 inch is really big, better for outdoor use, you can choose the best size for you.
The screen is washable, don't worry about fouling it.
If you want it for outdoor “backyard” movie/sporting events. This is the right one.
Mounted screens to a PVC frame like many have posted in buyer show.
To get a true idea of size difference, calculate the square inches of the screens you’re considering. You will be surprised how much difference there was between “similar sizes”. mounted the frame about 30” off the ground. The added height makes it seem even bigger.
The 200" screen is a beast, and you will need a sturdy frame for it.
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| Canvas Screen | Polyester Screen | PVC Screen | Double layer screen | Silver Screen | screen with stand | |
|
|
|
|
|
|||
| Customer Reviews |
1,782
|
233
|
— |
591
|
233
|
1,782
|
| Price | $96.00 | — | — | $29.99 | — | — |
| Gain | 1.6 | 1.3 | 1.7 | 1.4 | 2.4 | 1.3 |
| Size | 100-300" | 100-120" | 100-120" | 100'' and 150'' | 72-300" | 100'' |
| View Area | 160° | 160° | 160° | 160° | 120° | 160° |
| Accessories | a bag | rope, nails and bag | rope, nails and bag | rope, nails and bag | a bag | everything you need |
| machine washable | ✓ | ✓ | wipe with wet towel | ✓ | wipe with wet towel | ✓ |
| installation | PVC pipe or wood frame | hang on the wall by nails | PVC pipe and wood frame | hang on the wall or tree | everything will be ok | outdoor and indoor |
|
|
|
|
|---|---|---|
|
|
|
|
From the brand
NIERBO
We care what you care
-
How do we start?
NIERBO was established in 2014. We mainly provide audio-visual accessories and electronic products, and is committed to providing customers with high-quality products, strict quality control.
What makes our product unique?
We are committed to enriching customers' life with more humane products.
-
Canvas Projector Screen
-
Metal Projector Screen
-
Double Layer Projector Screen
-
Projector Screen with Stand
-
Home Audio Controller
Compare with similar items
This Item  NIERBO 200 Inch Large Huge Projector Screen Big 16:9 3D Movie Screen of Canvas Material Projection Screen HD for Outdoor Indoor Home Theater Church with a Black Projector Bag Not Include Mount |  |  |  |  | |
| Price | $96.00 | -43% $27.99 List: $48.99 | $48.59 | -11% $49.99 Typical: $55.99 | $88.98 |
| Delivery | Get it as soon as Sunday, May 12 | Get it as soon as Sunday, May 12 | Get it as soon as Sunday, May 12 | Get it as soon as Sunday, May 12 | Get it as soon as Monday, May 13 |
| Customer Ratings | |||||
| Value for money | |||||
| Picture quality | |||||
| Sheerness | |||||
| Sold By | NIERBO | AAJKUS | NIERBO | Japard | SL-TECH |
| size | 200 inch | 150' | 150 inch | — | — |
16:9 | 16:9 | 16:9 | 16:9 | 16:9 | |
| mounting type | Wall Mount | Wall Mount | Wall Mount | Inside Mount, Outside Mount | Inside Mount,Outside Mount,Freestanding |
| material | Canvas | Polyester | Polyester | Polyester | Canvas |
| weight | 6.61 pounds | 2.7 hundredths pounds | — | — | 0.8 kilograms |
| viewing angle | 160 degrees | 160 degrees | — | 160 degrees | 160 degrees |
Videos
Page 1 of 1Start OverPage 1 of 1
Videos for this product
0:42
Click to play video
Customer Review: USED NOT NEW!! DISGUSTING!
Heath Jordan
Reviews with images
Perfect screen for my particular set-up.
I built a wood frame to fit the garage door opening. Wrapping the screen around the frame, I used ratchet straps to make it taunt. What I ended up with was the perfect dimensions for films sporting 2:35:1 and 2:40:1 aspect ratios. Films with different aspect ratios will work. You'll just use less screen area.There are wrinkles when unfolding. It's unavoidable. Once taunt, a portable steamer is a great way to get rid of them.It's a lot of work for a few hours of entertainment, but worth it. The screen is HUGE!I have an idea to just simply and carefully wrap the garage door itself, but haven't had the time to give it a trial run.Assembly is as easy or as difficult as you want to make it. Creativity has a lot to do with that.
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
Reviewed in the United States on June 20, 2022
Size: 200 inchVerified Purchase
This is a good price for a 200 inch screen at less than $100. Screen is canvas but very white. The wrinkles weren’t a problem for me after I stretched it out over the frame. The grommets are good quality for attaching the screen to a frame. One negative is the loss of brightness due to the amount of light that penetrates the fabric. My projector is powerful enough to overcome this but may require a more powerful projector than other screens.
It seems that pvc frames are most popular but I used ¾” emt conduit. It’s plenty strong, light weight, and easy to use. Get 7 10’ lengths plus fittings. I ordered fittings from makerpipe.com.
The drawing shows the dimensions and fittings I used. The 3 vertical poles are used full length. Cut the 4 remaining pieces to equal lengths to make the upper and lower cross pieces about 185”. I had to cut each piece again to get to the proper length. The final length was 88 ¾” each but this will depend on the dimensions of the fittings you use. Use a conduit cutter for smooth and easy cuts.
When attaching the lower cross piece to the poles, use fittings that allow the pole to pass through without cutting so the cross piece can be raised or lowered to match the screen attachment method you use. To make attaching the screen quick and easy I attached a Velcro strip to each screen grommet. Cut a short slit in one end of the strip with scissors, and thread the strip through the grommet and then through the slit. No more threading bungee cords through grommets each time.
Attach one of the left-over pieces of emt to the end of each pole using a “T”. Stand the frame up and rotate the feet out to support it. Be sure to attach strings to the top of each end of the fame for additional support. It doesn’t take much of a breeze to blow it over.
I noticed that the center pole was visible during use due to the amount of light it reflected so I sprayed it with flat black paint, which fixed the problem.
I'm very happy with the combination screen and frame. I leave the frame assembled and leaning against our camper so set-up is a breeze. I figure if it takes more than 30 minutes to set it up we wouldn't use it as much as we do.
It seems that pvc frames are most popular but I used ¾” emt conduit. It’s plenty strong, light weight, and easy to use. Get 7 10’ lengths plus fittings. I ordered fittings from makerpipe.com.
The drawing shows the dimensions and fittings I used. The 3 vertical poles are used full length. Cut the 4 remaining pieces to equal lengths to make the upper and lower cross pieces about 185”. I had to cut each piece again to get to the proper length. The final length was 88 ¾” each but this will depend on the dimensions of the fittings you use. Use a conduit cutter for smooth and easy cuts.
When attaching the lower cross piece to the poles, use fittings that allow the pole to pass through without cutting so the cross piece can be raised or lowered to match the screen attachment method you use. To make attaching the screen quick and easy I attached a Velcro strip to each screen grommet. Cut a short slit in one end of the strip with scissors, and thread the strip through the grommet and then through the slit. No more threading bungee cords through grommets each time.
Attach one of the left-over pieces of emt to the end of each pole using a “T”. Stand the frame up and rotate the feet out to support it. Be sure to attach strings to the top of each end of the fame for additional support. It doesn’t take much of a breeze to blow it over.
I noticed that the center pole was visible during use due to the amount of light it reflected so I sprayed it with flat black paint, which fixed the problem.
I'm very happy with the combination screen and frame. I leave the frame assembled and leaning against our camper so set-up is a breeze. I figure if it takes more than 30 minutes to set it up we wouldn't use it as much as we do.
Images in this review
Reviewed in the United States on March 17, 2024
There are wrinkles when unfolding. It's unavoidable. Once taunt, a portable steamer is a great way to get rid of them.
It's a lot of work for a few hours of entertainment, but worth it. The screen is HUGE!
I have an idea to just simply and carefully wrap the garage door itself, but haven't had the time to give it a trial run.
Assembly is as easy or as difficult as you want to make it. Creativity has a lot to do with that.
Size: 250 inchVerified Purchase
Perfect screen for my particular set-up.
Reviewed in the United States on March 17, 2024
I built a wood frame to fit the garage door opening. Wrapping the screen around the frame, I used ratchet straps to make it taunt. What I ended up with was the perfect dimensions for films sporting 2:35:1 and 2:40:1 aspect ratios. Films with different aspect ratios will work. You'll just use less screen area.Reviewed in the United States on March 17, 2024
There are wrinkles when unfolding. It's unavoidable. Once taunt, a portable steamer is a great way to get rid of them.
It's a lot of work for a few hours of entertainment, but worth it. The screen is HUGE!
I have an idea to just simply and carefully wrap the garage door itself, but haven't had the time to give it a trial run.
Assembly is as easy or as difficult as you want to make it. Creativity has a lot to do with that.
Images in this review
Reviewed in the United States on September 19, 2023
Recently purchased NIERBO 200 Inch Large Huge Projector Screen for our movie night on our house.
Screen came packaged very well, in its own zipper-carry case.
Easy to unpack, and spread out. Comes with detailed care and usage instructions as well.
Very quality material, canvas was thicker than other screen I have seen. Double-stitched border with metal eyelets was strong and sturdy.
The screen itself was very bright, and definitely had a little bit of reflection to it, which made the screen images pop out. The material was thick enough to prevent any bleed through from behind during projection at night.
Did not iron or steam out the wrinkles, however after attaching the screen to the frame and pulling it taught, most of the wrinkles disappeared, and the ones that remained did not affect picture quality at all.
Built a frame for it that attached directly to the front of the house. (see images) Used 7/8" strut for the frame body, 1/4" strut-nuts with hooks on them to attach bungees to the eyelets. Points of attachment were behind the shutters so no visible holes in the siding. Came out great!
Size: 200 inchVerified Purchase
Awesome, affordable canvas projector screen!
Reviewed in the United States on September 19, 2023
A fantastic screen for movie night!Reviewed in the United States on September 19, 2023
Recently purchased NIERBO 200 Inch Large Huge Projector Screen for our movie night on our house.
Screen came packaged very well, in its own zipper-carry case.
Easy to unpack, and spread out. Comes with detailed care and usage instructions as well.
Very quality material, canvas was thicker than other screen I have seen. Double-stitched border with metal eyelets was strong and sturdy.
The screen itself was very bright, and definitely had a little bit of reflection to it, which made the screen images pop out. The material was thick enough to prevent any bleed through from behind during projection at night.
Did not iron or steam out the wrinkles, however after attaching the screen to the frame and pulling it taught, most of the wrinkles disappeared, and the ones that remained did not affect picture quality at all.
Built a frame for it that attached directly to the front of the house. (see images) Used 7/8" strut for the frame body, 1/4" strut-nuts with hooks on them to attach bungees to the eyelets. Points of attachment were behind the shutters so no visible holes in the siding. Came out great!
Images in this review
Reviewed in the United States on September 23, 2019
Top reviews from other countries
Lucklogic
Works well
Reviewed in the United Kingdom on March 12, 2023Size: 200 inchVerified Purchase
Chris
Great product
Reviewed in Australia on June 8, 2023Size: 180 inchVerified Purchase
Chris
Reviewed in Australia on June 8, 2023
Images in this review
Adele
Well made and great image
Reviewed in Australia on June 12, 2021Size: 250 inchVerified Purchase
Adele
Reviewed in Australia on June 12, 2021
Images in this review
