They might not be waterproof and/or indestructible, but they're certainly functional and very well built. There is a stout spring clip that applies plenty of clamping pressure for good conduction between the contacts. Mounting the cables into the plastic housing is a simple matter of slipping them in and hearing a click. It's almost impossible for anyone with normal mechanical ability to mess this up. Polarity is clearly marked on both sides so as long as you pay attention, you'll end up with a foolproof quick disconnect. Spray them with some dielectric lubricant to prevent corrosion and put them to work. I bought these to replace the pathetic stock connectors on a Boss snow plow.
Note that crimping the lugs onto a wire really does require using a proper crimping tool. Don't smash it flat with a hammer or it won't fit into the plastic holder. If you are installing them on wire smaller than 2AWG, it will require a lot of crimping to get it down small enough for a good hold. It can be done, but it's not pretty.
| Manufacturer | X-Haibei |
|---|---|
| Brand | X-Haibei |
| Model | 1 Pair Battery Quick Connector Kit 175A 2AWG |
| Item Weight | 6.4 ounces |
| Product Dimensions | 3 x 2 x 0.75 inches |
| Country of Origin | China |
| Item model number | BT0098 |
| Is Discontinued By Manufacturer | No |
| Manufacturer Part Number | 175A 2AWG Connector |
| Lift Type | Automatic |
| Voltage | 600 Volts |
