Frequently bought together
$98.35
Only 4 left in stock - order soon.
Total price:
To see our price, add these items to your cart.
Choose items to buy together.
From the brand
-
3M Personal Protective Equip.
-
At 3M, we are experts in helping keep your environment safe in a changing world. We develop our personal protective equipment (PPE) and other safety solutions based on decades of industry experience and a deep knowledge of industry standards, and extend our innovation to help keep your facilities, roads, and communities just as safe.
From the manufacturer
Reliable protection. Lightweight design.
3M Full Facepiece Reusable Respirator 6000 Series
Combining excellent visibility with lightweight design, the 3M Full Facepiece Reusable Respirator 6000 Series is a comfortable, durable, and easy to use solution in a variety of environments and applications.
- Travel light - Lightweight, well-balanced silicone faceseal
- Easy to use and maintain - Unique center adapter directs airflow downward. A smooth surface allows quick and easy cleaning
- Prepare for impact - Meets ANSI Z87.1 requirements to help provide limited eye and face protection against flying particles
- Line of sight - Large lens provides wide field of view, excellent visibility
- Go with the flow - 3M Cool Flow Valve helps direct hot, humid exhaled air outside the respirator
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| 3M Multi Gas Vapor Cartridge/Filter P100 | 3M Organic Vapor/Acid Gas Cartridge/Filter P100 | 3M Acid Gas Cartridge/Filter P100 | 3M Acid Gas Cartridge | 3M Ammonia Methylamine Cartridge/Filter P100 | 3M Formaldehyde Organic Vapor Cartridge/Filter P100 | |
|
|
||||||
| Customer Reviews |
15,188
|
730
|
730
|
143
|
730
|
730
|
| Price | $30.53 | — | $27.33 | $22.20 | $34.50 | $35.69 |
| Part Number | 60926 | 60928 | 60922 | 6002 | 60924 | 60925 |
| NIOSH Color Code | Magenta Olive | Magenta Yellow | Magenta White | White | Magenta Green | Magenta Black Olive |
| Chlorine and Hydrogen Chlorine | ✓ | ✓ | ✓ | ✓ | ||
| Sulfur Dioxide | ✓ | ✓ | ✓ | ✓ | ||
| Chlorine Dioxide | ✓ | ✓ | ✓ | |||
| Hydrogen Sulfide | ✓ | ✓ | ✓ | ✓ | ||
| Particulates | ✓ | ✓ | ✓ | ✓ | ✓ | |
| Ammonia | ✓ | ✓ | ||||
| Methylamine | ✓ | ✓ | ||||
| Formaldehyde | ✓ | ✓ |
Helping You Wear It Right (always read and follow user instructions)
|
|
|
|
|
|---|---|---|---|
Step 1Fully loosen all four head straps. Pull hair back with one hand. Bring facepiece up to face with other hand. |
Step 2While holding the facepiece in place, pull the straps over your head. |
Step 3Tighten the two bottom straps and then tighten the two top straps. |
Step 4Make sure the back of the harness is centered on the back of the head. |
Perform a User Seal Check (always read and follow user instructions)
|
|
|
|
|---|---|---|
Positive Pressure User Seal CheckPlace the palm of your hand over the opening in the exhalation valve cover and exhale gently. If facepiece bulges slightly and no air leaks are detected between the face and the facepiece, a proper seal has been obtained. If faceseal air leakage is detected, reposition the respirator on your face and/or readjust the tension of the straps to eliminate leakage and recheck seal. If you cannot achieve a proper seal, DO NOT enter the contaminated area. See your supervisor. |
Negative Pressure User Seal Check Using Particulate FiltersPlace your thumbs onto the center portion of the filters, restricting airflow through filters and inhale gently. If you feel facepiece collapse slightly and pull closer to your face with no leaks between the face and the facepiece, a proper seal has been obtained. If faceseal air leakage is detected, reposition the respirator on your face and/or readjust the tension of the straps to eliminate leakage and recheck seal. If you cannot achieve a proper seal, DO NOT enter the contaminated area. See your supervisor. |
Negative Pressure User Seal Check Using CartridgesPlace palms of hands to cover face of cartridge or open area of 3M Filter Retainer 501 and inhale gently. If you feel facepiece collapse slightly and pull closer to your face with no leaks between the face and facepiece, a proper seal has been obtained. If faceseal air leakage is detected, reposition the respirator on your face and/or readjust the tension of the straps to eliminate leakage and recheck seal. If you cannot achieve a proper seal, DO NOT enter the contaminated area. See your supervisor. |
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| 3M 6000 Series Full Facepiece Respirator | 3M FF-400 Series Full Facepiece Respirator | 3M 7800S Series Full Facepiece Respirator | 3M 6500QL Series Half Facepiece Respirator | 3M 7500 Series Half Facepiece Respirator | 3M 6000 Series Half Facepiece Respirator | |
| Customer Reviews |
879
|
900
|
5
|
8,466
|
2,959
|
13,041
|
| Price | $98.16 | $246.00 | $369.99 | $28.11 | $33.29 | $20.10 |
| Enhanced Durability | ✓ | ✓ | ✓ | ✓ | ||
| Enhanced Comfort | ✓ | ✓ | ✓ | ✓ | ||
| Drop-Down Feature | ✓ | ✓ | ||||
| 3M Cool Flow Valve | ✓ | ✓ | ✓ | ✓ | ||
| Compatible with 3M Supplied Air Systems | ✓ | ✓ | ✓ | ✓ | ✓ | |
| Compatible with 3M PAPR Systems | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| Eye Protection | ✓ | ✓ | ✓ | |||
| Six-Point Head Harness | ✓ | ✓ | ||||
| Silicone Faceseal | ✓ | ✓ | ✓ | ✓ | ✓ | |
| Compatible with Welding Shield | ✓ | ✓ |
Videos
Page 1 of 1Start OverPage 1 of 1
Videos for this product
0:47
Click to play video
The LAST respirator you'll ever need!
Kyle ☘️ Lucy Bamboo
Videos for this product
1:02
Click to play video
3M Full Facepiece Reusable Respirator review
Rodney Smith
Reviews with images
Beards, PAPR, & replaceable shields
I needed something to keep insulation dust out of my eyes and lungs while working in the attic. This fit the bill. Had initially tried wearing a dust mask in the attic, but it was too difficult to breath. So I bought this.Mine came with a free sample of a replaceable film that sticks to the outside of the lens. This prevents the actual respirator lens from getting scratched up. Really like that idea. A respirator is too big of an investment to have to replace simply because of scratches. Scratched up safety glasses can actually be dangerous when it impairs visibility. Kudos to 3M for thinking of this.The full face shield has good visibility. Overall the fit and comfort is good. The straps tighten easily and hold it in place securely. I feel like it's something I could wear for extended periods of time without it being a nuisance. Unlike a dust mask which I pulled off after only a few seconds and used my shirt instead. Have only used the respirator for about 20 minutes so far, but have a lot more work to do. If I have issues, I'll update later.Technically respirators aren't recommended to be worn with facial hair, because the hair creates a leak path. So I can't speak to the fit and seal under normal conditions. It seams to work well considering how I'm using it, with a full beard. The rest of this review is how I dealt with that.To make it easier to breathe and prevent leaking around my beard, I made a primitive positive air pressure system. Mounted a small fan inline with each filter using 3D printed adapters. It is powered by a drill battery in my pocket. Only plan on using in situations where a dust mask would be sufficient protection. I suspect that any kind of hazardous / flammable gas or smaller particulate could potentially be dangerous, since I don't have a perfect seal.Without the fans, it was easy enough to breath but a little humid in the respirator. But that could be due to not having a good inner seal because of the beard. And had to be careful to keep my beard from getting caught when tightening the lower straps. But that's my own fault.Have used for about 20 minutes working with insulation in the attic. So far so good. Didn't see any dust in the mask when I got done.
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
Reviewed in the United States on November 18, 2023
Reviewed in the United States on October 22, 2023
I needed something to keep insulation dust out of my eyes and lungs while working in the attic. This fit the bill. Had initially tried wearing a dust mask in the attic, but it was too difficult to breath. So I bought this.
Mine came with a free sample of a replaceable film that sticks to the outside of the lens. This prevents the actual respirator lens from getting scratched up. Really like that idea. A respirator is too big of an investment to have to replace simply because of scratches. Scratched up safety glasses can actually be dangerous when it impairs visibility. Kudos to 3M for thinking of this.
The full face shield has good visibility. Overall the fit and comfort is good. The straps tighten easily and hold it in place securely. I feel like it's something I could wear for extended periods of time without it being a nuisance. Unlike a dust mask which I pulled off after only a few seconds and used my shirt instead. Have only used the respirator for about 20 minutes so far, but have a lot more work to do. If I have issues, I'll update later.
Technically respirators aren't recommended to be worn with facial hair, because the hair creates a leak path. So I can't speak to the fit and seal under normal conditions. It seams to work well considering how I'm using it, with a full beard. The rest of this review is how I dealt with that.
To make it easier to breathe and prevent leaking around my beard, I made a primitive positive air pressure system. Mounted a small fan inline with each filter using 3D printed adapters. It is powered by a drill battery in my pocket. Only plan on using in situations where a dust mask would be sufficient protection. I suspect that any kind of hazardous / flammable gas or smaller particulate could potentially be dangerous, since I don't have a perfect seal.
Without the fans, it was easy enough to breath but a little humid in the respirator. But that could be due to not having a good inner seal because of the beard. And had to be careful to keep my beard from getting caught when tightening the lower straps. But that's my own fault.
Have used for about 20 minutes working with insulation in the attic. So far so good. Didn't see any dust in the mask when I got done.
Mine came with a free sample of a replaceable film that sticks to the outside of the lens. This prevents the actual respirator lens from getting scratched up. Really like that idea. A respirator is too big of an investment to have to replace simply because of scratches. Scratched up safety glasses can actually be dangerous when it impairs visibility. Kudos to 3M for thinking of this.
The full face shield has good visibility. Overall the fit and comfort is good. The straps tighten easily and hold it in place securely. I feel like it's something I could wear for extended periods of time without it being a nuisance. Unlike a dust mask which I pulled off after only a few seconds and used my shirt instead. Have only used the respirator for about 20 minutes so far, but have a lot more work to do. If I have issues, I'll update later.
Technically respirators aren't recommended to be worn with facial hair, because the hair creates a leak path. So I can't speak to the fit and seal under normal conditions. It seams to work well considering how I'm using it, with a full beard. The rest of this review is how I dealt with that.
To make it easier to breathe and prevent leaking around my beard, I made a primitive positive air pressure system. Mounted a small fan inline with each filter using 3D printed adapters. It is powered by a drill battery in my pocket. Only plan on using in situations where a dust mask would be sufficient protection. I suspect that any kind of hazardous / flammable gas or smaller particulate could potentially be dangerous, since I don't have a perfect seal.
Without the fans, it was easy enough to breath but a little humid in the respirator. But that could be due to not having a good inner seal because of the beard. And had to be careful to keep my beard from getting caught when tightening the lower straps. But that's my own fault.
Have used for about 20 minutes working with insulation in the attic. So far so good. Didn't see any dust in the mask when I got done.
Images in this review
Reviewed in the United States on March 22, 2024
