I needed this for a 1981 F100 with dual tanks. The original electric valve was non-functional. While the OEM valves electrical connector was a smaller spade terminal, the new valve was a ring terminal necessitating removing the original female spade connector and crimping on a ring terminal which isn't ideal as that area is exposed to the elements and creates an avenue for eventual failure. Care should be given to insure that connection is as best protected from moisture as best as possible.
The mounting ears were the correct spread however the mounting hole size on the new valve was smaller. I enlarged them so I could use the OEM bolts and I removed the nuts that were attached to the original valve and reused those.
While a few minor modifications were performed with only one being required, the reality is they are of little consequence and I'm happy just to be able to obtain a new valve that is essentially correct.
| Manufacturer | Standard Motor Products |
|---|---|
| Brand | Standard Motor Products |
| Model | Selector Valve |
| Item Weight | 10.4 ounces |
| Product Dimensions | 4.1 x 4.1 x 3.4 inches |
| Country of Origin | China |
| Item model number | FV1T |
| Exterior | Machined |
| Manufacturer Part Number | FV1T |
