I ordered this kit as well as a few other items for my LoC, amp, and sub installation for my 11th gen Civic. The 4G cable is far better than I had hoped it would be, very flexible, and it is OFC (Its been tinned so it won't look like copper). For anyone who isn't sure or doesn't know wiring, ground and positive cables are pretty much the same, just good practice to use different colors of the same gauge. Good practice would be to go actually research what it is you need thoroughly.
This kit is solid for a 4G power/ground setup for my amp, although I'm using a distro block before it goes to my AMP itself. The length of the positive is more than enough, I was able to cut enough for the ANL fuse block near my battery, as well as a good length to go from my distribution block all the way to my amp. There's less of the black version which is meant to be used for ground, where I'm having to install my distribution block vs my amp, I had just enough cable, but for anyone not grounding directly or installing next to the amp I would recommend purchasing more black in a longer length.
The 12G included for speaker I'm using for my sub, the cladding on it is great, its very flexible, and I'm really happy with it. 3rd party ferrules fit just fine so no issues there either.
The ANL fuse holder is solid, what you would expect from a smaller fuse holder, I just wish car manufacturers would make it easier to install aftermarket components like this. Pretty easy to install, just had to finagle the gasket around the ferrule and heat shrink before installing it to the fuse block, but otherwise its holding great.
I won't be using the RCA cables included by they look really solid, flexible like the rest of the cable, and definitely quality. I will however be using the remote signal wire they included, the jacket on it is thicker than standard 18g, and I might as well. The included terminals and heat shrink is pretty standard and works well, no complains there either.
I do not recommend anyone to install their own electrical equipment if they aren't able to pick up information and understand wiring basics. I also don't recommend relying entirely on this review to determine if this is the right kit for your car. Know how much wire you need before you order, coming up short is more costly, and its best to know what you're doing and what you need in advance. Otherwise, I definitely recommend this product.
Enjoy fast, free delivery, exclusive deals, and award-winning movies & TV shows with Prime
Try Prime
and start saving today with fast, free delivery
Additional Details
Small Business
Shop products from small business brands sold in Amazon’s store. Discover more about the small businesses partnering with Amazon and Amazon’s commitment to empowering them.
Small Business
This product is from a small business brand. Support small.
Similar item to consider
Hard Rock apparel
Outerwear, tees, and accessories. Discover the rock shop.
Frequently bought together
$72.99
Get it as soon as Monday, May 13
In Stock
Total price:
To see our price, add these items to your cart.
Choose items to buy together.
Similar items that may deliver to you quickly
Page 1 of 1 Start overPage 1 of 1
Product Description
KnuKonceptz Kolossus OFC 4 Gauge Complete 2 Channel Amplifier Installation Kit
Product Description
KnuKonceptz Kolossus amp installation kit's feature our top of the line Kolossus Fleks power and ground cables. Made up of ultra flexible pvc and ultra fine tinned strands of oxygen free copper (OFC), the Kolossus Kable is the standard for which all others are compared to. The KOL-AK4 amp kit provides 16.5 feet of blue power wire and 3 feet of translucent black (smoke) ground wire. The KnuKonceptz FH-44 fuse holder with a 120A fuse is provided within the KOL-AK4 amp install kit, but can be upgraded to a maximum of 150A fuse (sold separately). The fuse holder does not come installed within the cable, this allows the installer to place the inline fuse holder in an optimum location during installation. It also allows the installer to extend the power wire 1-3' by using the inline fuse holder to add cable to the main run (leaving the 16.5' as one unit and using the FH-44 to "splice" a few feet of wire)
Signal for your 2 channel amplifier installation kit is carried by the Klarity Kable 5 Meter (16.25') RCA Cable. The Klarity RCA Cable is a copper braid shielded coaxial RCA that uses a Hybrid metal/molded RCA termination with strain relief for a durable, low loss connection to your head unit and amplifier. A separate remote turn on lead is included. This wire is connected to your radio's power antenna lead or amp turn on lead (refer to your head unit's manual) Your amplifier's output is sent through KnuKonceptz Kord 12 gauge speaker wire, 20 feet of 12 gauge clear blue speaker wire is included with the kit.
The KOL-AK4 is a complete kit, meaning additional no additional parts are required to complete your installation.
Kit Includes:
- 16.5 Feet 4 Gauge Ultra Flex Blue Tinned Oxygen Free Copper Power Wire
- 3 Feet 4 Gauge Ultra Flex Black Tinned Oxygen Free Copper Ground Wire
- One inline fuse holder with 120A Mini ANL Fuse
- One 17 Foot OFC Klarity 2 Channel RCA Cable
- One 17 Foot OFC Remote Turn On Lead
- 20 Feet BLUE Kord Kable OFC 12 Gauge Speaker Wire
- 2 gold plated 4 gauge ring terminals, 2 gold plated 4 gauge spade terminals
- grommets and wire ties
How many watts can this amp kit handle? At KnuKonceptz, we do not use "watts" to rate our amp kits. This is a very inaccurate method to determine what the proper gauge wire required for your amp installation. Many amp manufactures do not represent the output of their product accurately in watts. Please refer to your amplifier's fuse rating, this is a number a manufacture can not fake, well they could but it would put their product in harms way! Add up the fuses on the end of your amp (two 30A fuses = 60A total draw) If this number is under 120A, this kit will fit your application. If over 150A, a larger gauge wire would be required. For this we recommend the KnuKonceptz Kolossus 0 Gauge amp kit
Plain and Simple Specifications
All KnuKonceptz Cable Products clearly state these specifications
- Wire type - CCA or OFC
These materials are commonly used, but not commonly stated when shopping online. Know what you are purchasing. Both metals are capable of performing up to their rated loads.
- American Wire Gauge
Wire gauge is crucial to powering your system correctly. Undersized cable will create unsafe conditions and may shorten your amplifier's life.
- Max Load (amps)
Wire's ampacity changes with gauge and materials. KnuKonceptz does not rate cable based on watts. Amplifier manufactures do not always truthfully state the output of their product, check your on board fuses!
True American Wire Gauge (AWG) Products
- Using American Wire Gauge standards, the gauge of stranded wire is determined by the total area of the conductor.
- To calculate this you would take the area of each strand and add it together. This area, in square mm, then determines gauge.
- Diameter is not as critical with stranded wire, this is due to the tiny air gaps between each strand. Diameter may fluctuate with strand size and how tightly wound the rope of the cable is.
- The smaller the number, the larger the wire, until you reach zero or aught (0). From zero, you then have double aught (00 or 2/0), three aught (000 or 3/0) ...
- Based on AWG, the true gauge of this cable is 4 Gauge
Tinned Copper - What the Pros Recommend
- When bare copper is exposed to oxygen, it oxidizes over time (turns brown/green).
- These contaminants are damaging to the cable's ability to conduct electricity.
- Tin provides a protective barrier from oxygen to the bare copper underneath.
- By adding a thin layer of tin to each strand, the cable is no longer able to oxidize.
- Tin does not react with oxygen and therefore the cable will never change color or have any change in its ability to conduct electricity
Klarity: clearly better
The Klarity RCA cable follows these principles, using quality materials and straight forward engineering and features:
- Oxygen Free Copper Signal Path
- Full Braid Shield
- Gold Plated Hybrid Metal/Molded RCA ends
- Ultra Flex Transparent Smoke PVC
Reviews with images
Great quality kit for up to 1500w. True OFC!!
Shopped around for a decent Oxygen Free Copper kit for my car. Found a few that were $20 cheaper. But seen multiple reviews on how the gauge size was off. Every cable in this kit is freaking quality! About a 90/100 Copper to Shielding ratio on the power cables. Speaker wire is super thick too. All cables are OFC as well!
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
Reviewed in the United States on March 10, 2024
Color: BlueVerified Purchase
Great quality kit for up to 1500w. True OFC!!
Reviewed in the United States on March 10, 2024
Shopped around for a decent Oxygen Free Copper kit for my car. Found a few that were $20 cheaper. But seen multiple reviews on how the gauge size was off. Every cable in this kit is freaking quality! About a 90/100 Copper to Shielding ratio on the power cables. Speaker wire is super thick too. All cables are OFC as well!
Reviewed in the United States on March 10, 2024
Images in this review
Top reviews from other countries
Wayne Young
Fantastic kit.
Reviewed in the United Kingdom on July 16, 2016Color: BlueVerified Purchase
Francisco M. Zacarias. Quintana
Kit audio
Reviewed in Spain on March 14, 2019Color: BlueVerified Purchase
